1. Dual marine battery charger for 12- and 24-volt batteries
2. 3-stage electronic switching circuit; 5 amps per output
3. Includes two 4-foot DC cables with ring terminals
4. 6-foot AC cable offers ConnectCharge plug
5. Measures 7.75 x 5.5 x 2.42 inches (W x H x D)

Customer Review :

Excellent charger

Mount it, plug it in and forget it's there. Worked great all winter and charges fast enough to fish twice a day! Super deal and highly recomended.

Rating :

connecting cords are too short

Overall the product is a well built charger. The problem lies in the fact that in most fishing boats the batteries are not within 4 feet of each other. It becomes a hassle disconnecting the front battery to make it reach. Also you need to be aware that you must complete the cycle, both cords to one battery or hook up both batteries. If you don't do this it will drain the battery.

Rating :

Guest 2611A charge pro series marine battery charger

It was a chore charging my two boat batteries individually. I came across this
charger which has good experience reviews from several users & for a very rea
sonable price. I bought this charger, installed it in my boat, & I am very
with it so afar.

Rating :

Best Charger I have ever owned

I had been using portable battery chargers for 5 years and have burned up 4 of them. I installed this on board charger and my trolling motor batteries have never lasted this long under heavy weed mat fishing. The ease of just plugging it in and walking away and not wondering if it is charging properly is relief to the mind. It was easy to install and has been working great.

Rating :

Works great

First of all, read the instructions. This is suggested to be installed vertically so I had to build a wooden bracket/stand for it to mount it.

The unit works great, it's hard to know if all 10 amps are really moved to the 2nd battery once the first battery it fully charged though. My half dead trolling battery took only 3'ish hours to recharge, but my almost dead starting battery took about 12 hours to fully charge. I would have figured the starting battery would have been able to re-charge much faster since all the power was supposed to have been routed to it after my trolling battery recharged.

This is my first charger though so who knows. I will never need to go out quicker than 12 hours after coming in from fishing anyways so that is not a problem for me.

It is easy to install and use.

Rating :

More reviews...

1. 12-volt battery
2. 110-volt charger for the Sevylor trolling motor or inflator with battery clips
3. 8 amp-hours

Editorial Review :

The Sevylor Rechargeable 12V Battery will power your Sevylor Trolling Motor or inflator (sold separately). This 12-volt battery provides 8 amp-hours of power.

Customer Review :

No review yet

1. For vessels under 23 feet at speeds less than 7 knots
2. High quality LED uses 90% less energy than traditional incandescent lights.
3. Batteries last up to 10 times longer
4. Great for added safety for inflateables, kayaks, canoes, dinghies, and jon boats

Editorial Review :

Side emitting 1W Luxeon LED bulb provides the highest quality LED portable light in the industry. LED extends battery life. Uses 4 AA batteries (not included), waterproof and it FLOATS!. Shock resistant high quality neoprene rubber housing with easy screw on/off projector. Suction cup mount included.

Customer Review :

Not dependable

These lights were initially very bright & seemed durable, but on our very first paddle with them, BOTH of the two lights we purchased randomly turned off & back on several times, for no apparent reason, even after we (with dry hands) checked to make sure they were assembled correctly. It was more than a little scary finding ourselves in the middle of open water after dark with lights that wouldn't stay on since we share the water with much bigger boats. Very disappointing.

Rating :

Nice light, bad application

Let me start by saying I did not look at my kayak closely prior to ordering a suction cup model. The light works perfectly and is very durable and a nice design. Now, if I'd looked closer at my kayak I'd have known the surfaces are not really designed for a suction cup attachment. Off to the drawing board and I'm confident I can get this to work with a homemade attachment of sorts. I've used the light several times and the batteries last for quite a long time. And, it works well for loading the kayak on the car in the dark after I'm finished.
My advice: Don't be dumb like I was and assume the suction cup base will work. Otherwise I highly recommend this little light.

Rating :

I'm So Excited About These!!

So I ordered four of these in total, for two kayaks: two white stern lights (these lights), and two red/green bow lights. I spent the next couple of days trying to figure out how to mount the lights before they actually arrived. My reasoning was that there was no way I'd be lucky enough for these suction cup mounts to actually stick to our plastic kayaks. Surely that would only work on the fiberglass models. So with expectations firmly in check, I came up with a couple of decent, but not perfect, temporary solutions involving the deck rigging and maybe a carabiner or two.

Well, then they arrived. I put the batteries in one and turned it on. It's bright! Good! Now how to mount it on the kayak... In my garage, I stuck one on to the Old Town kayak. Much to my surprise, the force of suction was so strong that I couldn't just pull it off! I had to peel the suction cup base up a little to kill the vacuum. Then I tried it on the Necky kayak with the same results! This is great -- they stay on with such force that I have no problem using them without rigging or anything else. Both of my kayaks are hanging sideways on the garage wall, and the suction cups will hold indefinitely with the lights hanging sideways, parallel to the ground! I have added an image of the light doing just that. Note that the light can be mounted either horizontally or vertically - there are two sets of screw threads to attach the suction cup to, one on the bottom of the light and one on the side.

The lights have proven their seaworthiness. They are waterproof. The manufacturer claim is that they float. I have no reason to doubt that claim, but guess what? They don't come off the kayak unless I want them to, so I don't know! Ha!

With 4 AA's, they're sure to last a good long time, too. I'd recommend getting alkalines or lithiums (GASP! I never thought I'd say that) over rechargeables, only because with infrequent use, the NiMH batteries tend to self-discharge over time, and you'll have to keep recharging them before every outing. If you don't mind doing that, then it's cool, but I already have to charge my GPS batteries, walkie batteries, camera batteries, flashlight batteries, etc., so I'll stick with the alkalines so I don't have to recharge an additional 16 batteries (remember, 4 lights!) every week or so.

Lastly, if you're going to have these out in the sun a lot (why?), or if you'll be using them in saltwater, the manual recommends using a silicon spray protectant of some kind to keep it in good shape, and give it a thorough washing after use. Probably a good idea - salt water destroys everything. Oh, and take care with the top when installing the batteries. It only goes on one way, and there's a tab that fits into a groove in the base. Don't go trying to force anything or you might damage it.

Rating :

bright light

Works much better than an older version that I had before. Very bright light and suction cup works well.

Rating :

1. For vessels under 23 feet at speeds less than 7 knots
2. High quality LED uses 90% less energy than traditional incandescent lights.
3. Batteries last up to 10 times longer
4. Great for added safety for inflateables, kayaks, canoes, dinghies, and jon boats

Editorial Review :

Side emitting 1W Luxeon LED bulb provides the highest quality LED portable light in the industry. LED extends battery life. Uses 4 AA batteries (not included), waterproof and it FLOATS!. Shock resistant high quality neoprene rubber housing with easy screw on/off projector. "C" clamp and suction cup mount included.

Customer Review :

This thing is excellent!!!

This review will be largely similar to the white stern lights, since they are equivalent in every way except 1) this lens is red and green, and 2) this light includes a C-clamp in addition to the suction cup.

So I ordered four of these in total, for two kayaks: two red/green bow lights (these lights), and two white stern lights. I spent the next couple of days trying to figure out how to mount the lights before they actually arrived. My reasoning was that there was no way I'd be lucky enough for these suction cup mounts to actually stick to our plastic kayaks. Surely that would only work on the fiberglass models. So with expectations firmly in check, I came up with a couple of decent, but not perfect, temporary solutions involving the deck rigging and maybe a carabiner or two.

Well, then they arrived. I put the batteries in one and turned it on. It's bright! Good! Not quite as bright as the white light, but that's to be expected since the lens on this one is colored, and the lens is clear on the other one. Now how to mount it on the kayak... In my garage, I stuck one on to the Old Town kayak. Much to my surprise, the force of suction was so strong that I couldn't just pull it off! I had to peel the suction cup base up a little to kill the vacuum. Then I tried it on the Necky kayak with the same results! This is great -- they stay on with such force that I have no problem using them without rigging or anything else. Both of my kayaks are hanging sideways on the garage wall, and the suction cups will hold indefinitely with the lights hanging sideways, parallel to the ground! I have added an image of the light doing just that. Note that the light can be mounted either horizontally or vertically - there are two set of screw threads to attach the suction cup to, one on the bottom of the light and one on the side.

The C-clamp that comes with this one.... well, let's just say that it doesn't serve a purpose for me, since these suction cups are so strong. However, if you prefer the clamp, it is pretty strong and mounts solidly to the light. Luckily it can be removed, and the suction cup can be used in its place.

The lights have proven their seaworthiness. They are waterproof. The manufacturer claim is that they float. I have no reason to doubt that claim, but guess what? They don't come off the kayak unless I want them to, so I don't know! Ha!

With 4 AA's, they're sure to last a good long time, too. I'd recommend getting alkalines or lithiums (GASP! I never thought I'd say that) over rechargeables, only because with infrequent use, the NiMH batteries tend to self-discharge over time, and you'll have to keep recharging them before every outing. If you don't mind doing that, then it's cool, but I already have to charge my GPS batteries, walkie batteries, camera batteries, flashlight batteries, etc., so I'll stick with the alkalines so I don't have to recharge an additional 16 batteries (remember, 4 lights!) every week or so.

Lastly, if you're going to have these out in the sun a lot (why?), or if you'll be using them in saltwater, the manual recommends using a silicon spray protectant of some kind to keep it in good shape, and give it a thorough washing after use. Probably a good idea - salt water destroys everything. Oh, and take care with the top when installing the batteries. It only goes on one way, and there's a tab that fits into a groove in the base. Don't go trying to force anything or you might damage it.

Rating :

1. Completely sealed LED units resist water intrusion
2. Reverse polarity protection has been added to eliminate potential mis-wiring damage
3. Our LED navigational lighting also features high quality electro-polished stainless steel covers designed to resist corrosion
4. Rated for 50,000+ hours of use and protected by a 10-year warranty
5. LED stainless steel 1 mile deck mount navigation bow light (starboard/green lens)

Editorial Review :

Attwood presents the most energy efficient LED navigational lights in the world. Through the use of proprietary optical design techniques, we've optimized our lens design to harness nearly 90% of all light being generated by the LED. In doing so, our line of 3500 and 5500 series navigational lights exceed US coast guard requirements with the fewest and lowest watt LEDs of any navigational light manufactured today. Less energy used by navigational lighting means more energy available for powering your boat and enjoying time on the water.

Customer Review :

Outstanding product.

Very well made, easy installation. A bargain compared to other LED Nav lights on the market.

Great performance on the water.

Rating :

boat lights

good light, lowest price i found on the net, low power draw is what i was looking for, easy install.

Rating :

A little feed back...

Casing for this light was a little weaker than I was hoping for but, I'm sure the only ones that might end up standing on it will be the kids, and that won't be more 90lbs. For the price and quality, you can't get any better! Thanks Attwood!

Rating :

Led navigation light

The product was well made and a definite inprovement over the incandescent lights that are in use now, especially when used in a salt water environment

Rating :

Attwood LED Navigation Lights

I installed a set of the Atwood LED lights on my boat recently. They are a simple install. The lights are much more brighter than my original lightbulb type lights. These lights are well worth the money.

Rating :